1. introduction
This machine can test various materials (both finished and
semi-finished products ) of tensile strength ,compressive strength
and elongation ,can do stripping ,tear strength ,flexural
,compression test and etc. It can connect up to the computer and
display or printout the test times , test value , max. value , etc
. Also it can make various report forms according to the
requirements .
The testing machine is widely used in all kinds of hardware, metal,
rubber and plastics, footwear, leather, clothing, textiles,
insulators, wires, cables, terminals and other types of materials,
testing, tensile, tear, peel,compression, bending, shear,
three-point bending ... and other physical test performance.
different jigs can be equipped with the machine
2. features
This tensile testing machine adopts two strong supports, precise
load cell to measure the load. Its crosshead can move up or down at
a constant speed.
This tensile testing machine can program the crosshead speed or
conduct cyclical testing, allow testing at a constant force,
testing at constant deformation, testing at constant displacement,
etc.
This testing machine can equip with extensometers to measure the
extension or deformation.
According to test requirement for temperature, humidity, pressure,
etc, special device, such as environmental chamber can be placed
around the test specimen to do test in certain temperature,
humidity or pressure.
Matched with various test fixture, like peal, puncture, tear,
pneumatic grip, belt tension, etc. This tensile testing machine can
be used to metal, non-metal, composite materials like rubber, steel
wire, plastic, seat belt, textile character test.
Protecting functions of over load, over current, over voltage,
crosshead limit moving space protection, auto stop at break.
3. software introduction
- Easy to control and friendly interface
windows based interface, easy and fast to reach different
functions, suitable for most of operators using habits. Integrated
all common operation functions, like specimen information input,
specimen choosing, curve plotting, data display, data process, data
analysis, test operation etc., easy and convenient to operate.
- Full digital display and computer control
Adopting remote controller, fast response and reliable to parameter
gathering. Realize digital adjustment and zeroing of load,
deformation and displacement as well as PID parameter adjusting.
- Different control mode & speed setting
- Programmable control mode
Users can program test mode according to their own requirements.
- Load holding facility for a specific period:
Report is editable
4. specification
| Model | WDW-5/10/20/50 | WDW-100 | WDW-200/300 | WDW-500/600 |
| Max. capacity(kN) | 5/10/20/50 | 100 | 200/300 | 500/600 |
| Measuring range | 1%~100%FS(0.4%-100%FS) |
| Grade | Grade 1(Grade 0.5) |
| Force resolution | 1/400000 |
| Deformation measuring range | 2%~100%FS |
| Relative error of deformation value | +/-1%(+/-0.5% |
| Deformation resolution | 1/4000000 |
| Force speed | 0.01-50 kN/s |
| Deformation speed | 0.01-30mm/min |
| Displacement speed | 0.01-500mm/min (can be 1000mm/min) | 0.01-300mm/min | 0.01-250mm/min |
| Tensile fixture for round and flat specimen | Standard one set tensile fixture for round specimen, one set
tensile fixture for round specimen, one set of compression platen,
other test fixture can be equipped according to client’s
requirement or relative test method |
| Extensometer | According to test materials or client’s requirement |
| High and low temperature test | According to relative test method or client’s requirement |
| Max. stroke of crossbeam | 1090mm | 1070mm | 1140mm | 1200mm |
| Effective tensile space (equip with metal tensile fixture) | 800mm | 700mm | 600mm | 600mm |
| Distance between columns | 430mm | 550mm | 600mm | 625mm |
| Power | 220V,1.0kw | 220V,2kw | 220V,3kw | 380V,4kw |
| Dim. Of loading frame(cm) | 79x43x186 | 92x50x198 | 110x60x241 | 130x87x250 |
| Weight | 400kg | 700kg | 1150/1250kg | 2500kg |
1. Do you offer after-sales service? How can I ask for that? And
how about the warranty?
Every machine from our factory has a 14-month warranty after
shipment. Generally, we offer 12 months for the FREE maintenance,
while considering of sea transportation, we can extend 2 months for
our customers.
If your machine doesn’t work, you can send E-mail to us and we will try our best to find
the problem by email or skype video chat if neccesary. After
confirmation of the problem, we can send you new spare parts or
provide on-site repair.
2. What’s the delivery term?
At most of time, we have stock in the factory. If there is no
stock, normally, the delivery time is 15-20 working days after
deposit receipt. If you are in urgent need, we can consider making
a special arrangement for you.
3. Do you accept customization service? Can I have my logo on the
machine?
Yes, of course. We can not only offer standard machines, but also
customized
machines according to your requirements. And we can also put your
logo on the machine.
