1. introduction
Universal Testing Machine D-series are the most popular ones for
testing metal samples, concrete, rebar, tube & pipe, stranded wire,
steel bar & plate, fasteners,wood and high-strength composites.
2. features
This universal testing machine adopts 2 screws and 2 or 4 columns,
precise load cell to measure the load. Its crosshead can move up or
down at a constant speed.
This universal testing machine can program the crosshead speed or
conduct cyclical testing, allow testing at a constant force,
testing at constant deformation, testing at constant displacement,
etc.
This testing machine can equip with extensometers to measure the
extension or deformation.
According to test requirement for temperature, humidity, pressure,
etc, special device, such as environmental chamber can be placed
around the test specimen to do test in certain temperature,
humidity or pressure.
Matched with various test fixture, like peal, puncture, tear,
pneumatic grip, belt tension, etc. This UTM can be used to metal,
non-metal, composite materials like rubber, steel wire, plastic,
seat belt, textile character test.
Protecting functions of over load, over current, over voltage,
crosshead limit moving space protection, auto stop at break.
3. software introduction
- Easy to control and friendly interface
windows based interface, easy and fast to reach different
functions, suitable for most of operators using habits. Integrated
all common operation functions, like specimen information input,
specimen choosing, curve plotting, data display, data process, data
analysis, test operation etc., easy and convenient to operate.
- Full digital display and computer control
Adopting remote controller, fast response and reliable to parameter
gathering. Realize digital adjustment and zeroing of load,
deformation and displacement as well as PID parameter adjusting.
- Different control mode & speed setting
- Programmable control mode
Users can program test mode according to their own requirements.
- Load holding facility for a specific period:
Report is editable
4. specification
| Model | WAW-W/P300 | WAW-W/P600 | WAW-W/P1000 | WAW-W2000 |
| Capacity(kN) | 300 | 600 | 1000 | 2000 |
| structure | 2 columns 2 lead screws | 4 columns 2 lead screws | 4 columns 2 lead screws | 4 columns 2 lead screws |
| Measuring force range | 2%-100%FS |
| Accuracy of load | +/-1%( or +/-0.5%) |
| Accuracy of deformation | +/-0.5% |
| Deformation measuring | Clip-on extensometer, standard gauge length, elongation 5/10/25mm |
| Max. tensile space(mm) | 550 | 600 | 750 | 800 |
| Max. compression space(mm) | 450 | 500 | 600 | 700 |
| Flat specimen range(mm) | 0-15 | 0-30 | 0-40 | 20-60 |
| Round specimen range(mm) | Dia. 10-32 | Dia.13-40 | Dia.13-60 | Dia.35-80 |
| Compression platen(mm) | 200x200 | 200x200 | 200x200 | 200x200 |
| Bending support roller distance(mm) | 350 | 350 | 350 | 350 |
| Bending roller width | 100mm | 140mm | 140mm | 140mm |
| Bending roller dia.(mm) | 30 | 30 | 30 | 50 |
| Ram stroke(mm) | 250 | 250 | 250 | 250 |
| Clamping mode | Hydraulic automatic |
| Dim. Of loading frame(mm) | 910x550x2370 | 960x650x2600 | 1160x1100x2600 |
| Dim of control cabinet | 1100x700x950mm |
| Weigth | 2600kg | 2600kg | 3400kg | 6500kg |
| Key | WAW-W series: computer control servo hydraulic universal testing
machine WAW-P series: computer display hydraulic universal testing machine |
Full Support Before the Purchase
- Our dedicated technicians are happy to discuss your upcoming
inquiry - from detailed machine requirements to shipping
requirements and everything between. We will take you through what
you need to know to confirm your equipment purchase.
All requirements will be replied within 24 hours.
On-Site Inspection Before the Shipment
We are dedicated to prepare good service to all customers and
agents. detailed photos will be taken and sent to clients before
the shipment.
Training & Installation
- Many of our products do not require pre-install documentation. We
will try our best to ship the machines integrally which are ready
to power up and to use. If clients require on-site support, our
engineers are ready to go.
When it comes to machines requiring installation, you can expect we
will deliver the best installation in the industry.
If you, our valued customer, choose to self-install your machine,
we will electronically mail the pre-installation documentation and
installation video to you (if required).
If on-site training & installation is required, we will send at
least two service man to support in clients’ workshop.
14 Months’ Warranty
- We will warrant all the machines that we sell for 14 months from
the usage of the end user.
